RE - Y (St) Y-fl  
RE - Y (St) Y-fl PiMf  
RE - Y (St) YSWAY-fl  
RE - Y (St) YSWAY-fl PiMf  
RE - 2Y (St) Yfl  
RE - 2Y (St) Yfl PiMf  
RE - 2Y (St) 2YSWAY-fl  
RE - 2Y (St) 2YSWAYfl  
RE-2Y (St) 2YSWAYfl
300 / 500 V
Technical Data : Rated Voltage Max : 300/500 V
Test Voltage : Core : core : 1000 V
    Core : screen : 1000 V
Insulation resistance min : 5G Ohm x km
Mutual capacitance : at 1 kHz
    115 nF/km
Capacitance unbalance : at 1 kHz 250 pF/m
Temperature rating : During operation : - 40°C up to + 70 °C
    During installation : -0°C up to + 50 °C
Minimum bending radius : 8 x overall diameter
Note : - Flame retardant according to BS 4066 part 3
    - Low Smoke Zero Halogen Flame Retardant Cables to IEC 754/IEC 61034
    are optional
Cable Construction : - Conductors of plain copper, sizes 1/0.8, 1/1.13, 16/0.2, 24.02*
    or 7/0.53mm
    - Insulation of polyethylene type 03 according to BS 6234
    - Colour coded
    - Cores twisted to pairs, pairs to cable (two pairs manufactured as quad)
    - Binder of PETP tape (except one pair cables), minimum overlap of 25%
    - Collective screen of aluminium/PETP tape, 0.0024mm thick,
    over tinned drain wire 0.5mm2, minimum overlap of 25%
    - Bedding of polyethylene type 03 according to BS 6234, Black
    - Armour of galvanized steel wires according to BS 1442
    - Sheath of PVC compound type TM1 according to BS 6746, Black
Application : It is used for transmission of analogous and digital signals in and around
    process plants, dry and damp industries and recommended for underground
    burial